N7 Flight Controller Power Module Q&A
Q1
What is the input voltage range supported by the power module?
2–14S.
Q2
What is the output voltage from the power module to the flight controller?
5.2V.
Q3
What is the current output capacity of the power module?
Continuous: 2A / Maximum: 3A.
Q4
What is the battery connector type?
XT60.
Q5
What is the mainboard constant current?
60A.
Q6
What is the mainboard peak current?
100A (duration < 60 sec).
Q7
What is the maximum current monitoring range of the power module?
120A.
Q8
What are the product dimensions?
23×29mm (mainboard size).
Q9
What is the product weight?
32g (including cables and connectors).
Q10
How do I calibrate the current sensor?
Step 1: Power the system with a battery and connect to the ground station.
Step 2: Use a multimeter or battery checker (e.g., BB ring) to measure the current battery voltage.
Step 3: In the ground station, set the sensor version to 0. Enter the measured voltage into the corresponding field, then click anywhere on the screen or press the Tab key. The ground station will automatically calculate a voltage divider coefficient and save it to the flight controller.
Step 4: Calibration complete. The current reading does not require further calibration.
Step 2: Use a multimeter or battery checker (e.g., BB ring) to measure the current battery voltage.
Step 3: In the ground station, set the sensor version to 0. Enter the measured voltage into the corresponding field, then click anywhere on the screen or press the Tab key. The ground station will automatically calculate a voltage divider coefficient and save it to the flight controller.
Step 4: Calibration complete. The current reading does not require further calibration.